Omron CJ1W-SCU32 Operation Manual page 379

• Sending Device Read/Write Commands Common to AnA/AnU CPU
Sequence Communications
No. (HEX) sequence name
810 Device memory
(032A) batch read as word
data (all device
types except T/C)
811 Device memory
(032B) batch read as word
data (T/C device
type)
812 Device memory fill
(032C) as word data (all
device types
except T/C)
813 Device memory fill
(032D) as word data (T/C
device type)
814 Device memory
(032E) batch read as bit
data (all device
types except T/C)
815 Device memory
(032F) batch read as bit
data (T/C device
type)
816 Device memory fill
(0330) as bit data (all
device types
except T/C)
817 Device memory fill
(0331) as bit data (T/C
device type)
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Computer Link Device type
command
QR (Device Device other
memory batch than
read as word Timer/Counter
data)
Timer/Counter
(T, C)
QW (Device Device other
memory fill as than
word data) Timer/Counter
Timer/Counter
(T, C)
JR (Device Device other
memory batch than
read as bit data) Timer/Counter
Timer/Counter
(T, C)
JW (Device Device other
memory fill as bit than
data) Timer/Counter
Timer/Counter
(T, C)
A Standard System Protocol
Function
Reads the word data for the number of device
points starting from the specified device address
for the specified device type (except T, C) in the
Mitsubishi Computer Link Module with the spec-
ified station number (and the PLC number that
follows), converts the data into hexadecimal,
and stores it starting from the specified word + 2
in the CS/CJ-series CPU Unit.
Reads the word (PV) data for the number of
device points starting from the specified device
address for the specified device type (T, C) in
the Mitsubishi Computer Link Module with the
specified station number (and the PLC number
that follows), converts the data into hexadeci-
mal, and stores it starting from the specified
word + 2 in the CS/CJ-series CPU Unit.
Writes the word data starting from the specified
word + 7 in the CS/CJ-series CPU Unit to the
number of device points starting from the speci-
fied device address for the specified device type
(except T, C) in the Mitsubishi Computer Link
Module with the specified station number (and
the PLC number that follows).
Writes the word (PV) data starting from the
specified word + 7 in the CS/CJ-series CPU Unit
to the number of device points starting from the
specified device address for the specified device
type (T, C) in the Mitsubishi Computer Link Mod-
ule with the specified station number (and the
PLC number that follows).
Reads the bit data for the number of device
points starting from the specified device address
for the specified device type (except T, C) in the
Mitsubishi Computer Link Module with the spec-
ified station number (and the PLC number that
follows), converts the data into hexadecimal,
and stores it starting from the specified word + 2
in the CS/CJ-series CPU Unit.
Reads the bit (PV) data for the number of device
points starting from the specified device address
for the specified device type (T, C) in the Mitsub-
ishi Computer Link Module with the specified
station number (and the PLC number that fol-
lows), converts the data into hexadecimal, and
stores it starting from the specified word + 2 in
the CS/CJ-series CPU Unit.
Writes the bit data starting from the specified
word + 7 in the CS/CJ-series CPU Unit to the
number of device points starting from the speci-
fied device address for the specified device type
(except T, C) in the Mitsubishi Computer Link
Module with the specified station number (and
the PLC number that follows).
Writes the bit (PV) data starting from the speci-
fied word + 7 in the CS/CJ-series CPU Unit to
the number of device points starting from the
specified device address for the specified device
type (T, C) in the Mitsubishi Computer Link Mod-
ule with the specified station number (and the
PLC number that follows).
R-45