System-Defined Variable - Omron CJ1W-SCU32 Operation Manual

4-2-3

System-defined Variable

Port 1 and Port 2 Port Settings Changing Flags
You can use an Out instruction or other instruction in the program to turn these bits from FALSE to
TRUE to change communications settings and restart the Serial Communications Unit ports. After
you change the settings and restart the communications port, the flag will automatically change to
FALSE.
These flags are used both to change the communications port settings and to restart the communi-
cations port at the same time. Accordingly, in cases where these flags are turned from FALSE to
TRUE only to restart a communications port by using an Out instruction or other instruction, you can
turn these flags from FALSE to TRUE without changing the system settings of the device variables
for CJ-series Unit.
List of System-defined Variables (** corresponds to the unit number.)

System-defined variable

_CJB_SCU**P1ChgSta
_CJB_SCU**P2ChgSta
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Type R/W
BOOL RW Serial Communications Unit
** Port 1 Settings Changing
Flag
BOOL RW Serial Communications Unit
** Port 2 Settings Changing
Flag
4 Using Protocol Macros
Name
TRUE: Port 1 Communications Unit Port
Settings Change
FALSE: All other statuses
Default: FALSE
TRUE: Port 2 Communications Unit Port
Settings Change
FALSE: All other statuses
Default: FALSE
Function
4-21
4