Omron CJ1W-SCU32 Operation Manual page 426

A Standard System Protocol
Additional Information
• This sequence cannot be used to set the error lower limit (EL), error upper limit (EH), error
exclusion counter (CNT) of the error data exclusion function (centerless grinder function).
• The following settings must be made together with this sequence; they cannot be set sepa-
rately.
Lower limit, upper limit
Multistep selection limit
Reference value, analog output scale number
Data output conditions, scheduled print timer
• The limit value, reference value, and offset value can be set to 3 digits for the integer portion
and to 4 digits for the decimal portion.
Measurement Condition Release (3000-series) (Sequence No. 408
(Hex 0198))
This sequence releases the measurement conditions that have been set.
Send Data Word Allocation (3rd Operand of PMCR(260))
Send data word allocation is similar to that of sequence No. 407 (Measurement Condition Set).
However, only the setting Yes/No flags at +46 to +53 from the send data leading word can be used.
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Additional Information
• The following conditions are used when the measurement conditions are released: Segment
becomes 1, measurement interval becomes 1, the number of sample measurement pulses
becomes 1.
• The following conditions cannot be released with this sequence: error lower limit (EL), error
upper limit (EH), error exclusion counter (CNT) of the error data exclusion function (centerless
grinder function).
• The following settings cannot be released separately using this sequence.
Lower limit, Upper limit
Multistep selection limit
Reference value, analog output scale number
Data output conditions, scheduled print timer
Measurement Condition List Request (3000-series)
(Sequence No. 409 (Hex 0199))
This sequence requests the measurement condition settings that have been set and other settings.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
R-92 CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)