Omron CJ1W-SCU32 Operation Manual page 171

Device variable for CJ-series Unit
Port 1
*_P1_PmrRepCntSta
*_P1_PmrSetRepCntS
ta
*_P1_PmrCurRepCntS
ta
* When the repeat counter is used to read words and 0 is read, 0 will be stored and the step will be skipped.
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Port 2
*_P2_PmrRepCntSta
*_P2_PmrSetRepCntS
ta
*_P2_PmrCurRepCntS
ta
Type R/W Name
WORD R Repeat
Counter
USINT R Repeat
Counter Set-
ting Value (*)
USINT R Repeat
Counter
Present Value
(*)
4 Using Protocol Macros
Function
Bits 08 to 15: Repeat
Counter Setting Value
Bits 00 to 07: Repeat
Counter Present Value
The number of times a
step is repeated is set in
this variable.
Range: 0 to 255
The Repeat Counter vari-
able N is set.
The value is cleared when
the sequence execution
starts, when the STUP
instruction is executed,
and at restarts. Range: 0
to 255
4
4-35