Omron CJ1W-SCU32 Operation Manual page 103

Device variable for CJ-series Unit
Port 1
*_P1_PmrAbtSta
*_P1_PmrTracingSta
*_P1_PmrSeqEndSta
*_P1_PmrSeqAbtSta
*_P1_PmrSeqWaitSta
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
2 Initial Settings and Allocations of Device Variable for CJ-series Unit
Port 2
*_P2_PmrAbtSta BOOL
*_P2_PmrTracingSta BOOL
*_P2_PmrSeqEndSta BOOL
*_P2_PmrSeqAbtSta BOOL
*_P2_PmrSeqWaitSta BOOL
Type R/W Name
R Abort Flag
R Tracing Flag
R Sequence End
Completion
Flag
R Sequence
Abort Comple-
tion Flag
R Sequence Wait
Flag
Function
This flag is changed to
TRUE when processing is
ended by using the abort
switch from the user pro-
gram.
When the abort switch is
turned ON at the end of a
sequence, the sequence
may end with either End or
Abort status.
This flag is changed to
TRUE while time series
data for send and receive
messages is traced with
an instruction from the
CX-Protocol.
This flag is changed to
TRUE when a sequence is
completed for the next
process or for an error
process with an End com-
mand.
Note When a sequence
has ended normally,
setting End (Abort
when the sequence
has ended abnor-
mally) enables this
flag to determine
whether or not the
sequence execution
has ended normally.
TRUE: Sequence ended
FALSE: Sequence not
ended
This flag is changed to
TRUE when a sequence is
ended for the next process
or for an error processing
with an Abort command.
TRUE: Sequence aborted
FALSE: Sequence not
aborted
This flag is changed to
TRUE when a sequence is
in the waiting state due to
the WAIT command.
Waiting is released when
the Wait Release Switch is
changed to TRUE in the
user program, and the
sequence will move to the
next step.
2-29
2