Omron CJ1W-SCU32 Operation Manual page 420

A Standard System Protocol
3Z4L Clear (Sequence No. 400 (Hex 0190))
This sequence resets errors, data, analog output, and decision result, and puts the Laser Micrometer
into standby.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Memory Switch Set (Sequence No. 401 (Hex 0191))
This sequence sets memory switches and the area for the work position LED.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of send
data
Offset
+0 Number of send data
words (4 digits Hex)
+1 w (1 digit BCD)
x (1 digit BCD)
y (1 digit BCD)
z (1 digit BCD)
+2 v (1 digit BCD)
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
mm Unit Set (Sequence No. 402 (Hex 0192))
This sequence sets the display unit to mm.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Additional Information
This sequence can be used for the 3Z4L-4000 Series only when pin 8 on DIP switch SW2 is
turned ON.
R-86
+0 Number of send data words
W X Y
+1
+2 (Undefined)
Contents
(data format)
0003 (fixed)
Using buzzer sound: 0 to 3
Automatic latch release time: 0 to
9
Using print timer, the setting for
simultaneous measurement: 0 to
3 (high-speed), 0 to 1 (other)
Display of the comma for
1/1000s digit, number of
display digits: 0 to 5 (high-speed),
0 to 3 (other)
Measurement interval 4: 0 to 6
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Z
V
Data
3000-series
0003 (fixed)
Number of digits for extinguishing
indicator: 0 to 2
I/O IF RUN Input: 0 or 1
Display of Err–0: 0 or 1
Averaging method: 0 to 2 (high-
speed), 0 (other)
Use of comma: 0 or 1
4000-series