Omron CJ1W-SCU32 Operation Manual page 184

4 Using Protocol Macros
ST
System-defined variable
Name
_Port_isAvailable
User-defined variables (To be defined before or when creating a program)
Name
State
Trigger
InPort
SendData
RecvData
End_ExecPMCR
TmpData
RS_instance
ExecPMCR_instance
F_TRIG_instance
* When HR, DM, or EM is specified as an allocated address (AT) for user-defined variables, set the Retention
Specification to Retained. When CIO/WR is specified, set it to No-retained.
4-48
Data Factory
type setting
BOOL --- Network Communica-
tions Instruction
Enabled Flag
Data type Factory setting
INT 0
BOOL False
_sPORT (UnitNo:=_CBU_No0
0, PhysicPortNo:=0)
ARRAY[0..4] OF [5(16#0)]
WORD
ARRAY[0..3] OF [4(16#0)]
WORD
BOOL False
DINT 0
RS ---
ExecPMCR ---
F_TRIG ---
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Comments
This flag becomes TRUE when
there are internal logic ports
available, FALSE when there is
no internal logic port available.
Allocated
address
(AT)
---
---
---
---
%D200 (*)
---
---
---
---
---
Details
Details
Transition status
Execution conditions
Port setting
Send data
Receive data
ExecPMCR instruc-
tion execution com-
pletion
Present value of
E5@N
---
---
---