Omron CJ1W-SCU32 Operation Manual page 182

4 Using Protocol Macros
Device variables for CJ-series Unit (To be created on the I/O Map View
window after the unit configuration is created)
Name
SCU_P1_PmrExecSt
a
SCU_P1_PmrSeqEn
dSta
SCU_P1_PmrSeqAbt
Sta
4-46
Data Factory
type setting address (AT)
BOOL --- IOBus://rack#0/slo
t#0/P1_PmrSta/P
1
_PmrExecSta
BOOL --- IOBus://rack#0/slo
t#0/P1_PmrSta/P
1
_PmrSeqEndSta
BOOL --- IOBus://rack#0/slo
t#0/P1_PmrSta/P
1
_PmrSeqAbtSta
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Allocated
Comments
Port 1:
Protocol
Macro Exe-
cuting Flag
Port 1:
Sequence
End Com-
pletion Flag
Port 1:
Sequence
Abort Com-
pletion Flag
Details
This flag becomes TRUE
when a ExecPMCR
instruction (sequence) is
executed.
This flag becomes
FALSE when the
sequence is completed
(either when it is ended
by End, or when it is
ended by Abort).
The flag becomes TRUE
when a sequence is com-
pleted for the next pro-
cess or for an error
process with an End
command.
The flag becomes TRUE
when a sequence is
ended for the next pro-
cess or for an error pro-
cessing with an Abort
command.