Omron CJ1W-SCU32 Operation Manual page 211

Device variables for CJ-series Unit (To be created on the I/O Map View
window after the unit configuration is created)
Name
SCU_P1_PmrE
xecSta
SCU_P1_PmrS
eqEndSta
SCU_P1_PmrS
eqAbtSta
SCU_P1_SgwD
sblCmd
SCU_P1_PmrS
gwProhSta
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Data type Factory Allocated address
setting
BOOL --- IOBus://rack#0/slot#0
/P1_PmrSta/P1_Pmr
ExecSta
BOOL --- IOBus://rack#0/slot#0
/P1_PmrSta/P1_Pmr
SeqEndSta
BOOL --- IOBus://rack#0/slot#0
/P1_PmrSta/P1_Pmr
SeqAbtSta
BOOL --- IOBus://rack#0/slot#0
/P1_SoftSw/P1_Sgw
DsblCmd
BOOL --- IOBus://rack#0/slot#0
/P1_PmrSta/P1_Pmr
SgwProhSta
Comments
(AT)
Port 1: Protocol
Macro Execut-
ing Flag
Port 1:
Sequence End
Completion Flag
Port 1:
Sequence Abort
Completion Flag
Port 1: Serial
Gateway Pro-
hibit Switch
Port 1: Serial
Gateway Prohib-
ited Flag
5 Serial Gateway
Details
This flag becomes
TRUE when an
ExecPMCR instruc-
tion (sequence) is
executed.
This flag becomes
FALSE when the
sequence is com-
pleted (either when it
is ended by End, or
when it is ended by
Abort).
This flag becomes
TRUE when a
sequence is com-
pleted for the next pro-
cess or for an error
process with an End
command.
This flag becomes
TRUE when a
sequence is ended for
the next process or for
an error processing
with an Abort com-
mand.
When this switch is
changed from TRUE
to FALSE, Serial
Gateway function is
not prohibited.
This flag is set to
TRUE when the Serial
Gateway function
(mode) is prohibited.
This flag is set to
FALSE when the
Serial Gateway is not
prohibited.
5-19
5