Omron CJ1W-SCU32 Operation Manual page 421

E Unit Set (Sequence No. 403 (Hex 0193))
This sequence sets the display unit to E.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Additional Information
This sequence can be used for the 3Z4L-4000 Series only when pin 8 on DIP switch SW2 is
turned ON.
Calibration Set (Sequence No. 404 (Hex 0194))
This sequence calibrates the Laser Micrometer.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of send
data
Offset
+0 Number of send data words
(4 digits Hex)
+1 HC gauge dimension (Decimal
portion)
(4 digits BCD)
+2 HC gauge dimension (integer
portion)
(3 digits BCD)
+3 HC gauge dimension (Sign)
(ASCII 1 character)
+4 to +6 LC gauge dimensions
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
+0
Number of send data words
+1 Decimal portion
Decimal integer portion
(Undefined)
+2
+3 Sign
Decimal portion
+4
(Decimal integer portion)
(Undefined)
+5
Sign
+6
Contents (data format)
A Standard System Protocol
High calibration
gauge dimension
(Undefined)
Low calibration
gauge dimension
(Undefined)
0007 (fixed)
0000 to 9999
000 to 999
if +: 20(' ')
if –: 2D('–')
Same as HC gauge dimensions
Data
Example –123.4567
+1 4 5 6 7
+2 0 1 2 3
+3 2 D 0 0
R-87