Omron CJ1W-SCU32 Operation Manual page 440

A Standard System Protocol
3Z4L Initialize (3000-series) (Sequence No. 430 (Hex 01AE))
This sequence clears the 3Z4L, sets the mm unit, sets memory switches, does not process statistics,
and clears the statistic memory in sequence.
Send Data Word Allocation (3rd Operand of PMCR(260))
The send data word allocation is similar to that of sequence No. 401 (Memory Switch Set)
Receive Data Word Allocation (4th Operand of PMCR(260))
None.
Additional Information
Memory switch settings will be ignored for this sequence for 5000-series and 6000-series Laser
Micrometers.
Measurement Condition Set (4000-series) (Sequence No. 431 (Hex
01AF))
This sequence sets measurement conditions. Conditions to be set can be selected by setting Yes/No
flags.
Send Data Word Allocation (3rd Operand of PMCR(260))
First word of
send data
R-106
+0 Number of send data words
(Undefined)
+1
+2
(Undefined)
Decimal portion
+3
+4 (Undefined) Integer portion
+5 Sign
+6 Decimal portion
+7
(Undefined) Integer portion
+8 Sign
+9
Decimal portion
+10 (Undefined) Integer portion
+11
Sign
+12
(Undefined)
+13
(Unused)
+14
(Unused)
+15
(Unused)
+16
(Undefined)
+17 (Undefined) Data output timer (BCD 3 digits)
+18
(Undefined)
+19
0
+20 0
+21
0
+22
0
+23
0
+24
0
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
Segment number (SG)
Measurement interval number (M)
Lower limit value (LL)
(Undefined)
Upper limit value (LH)
(Undefined)
Reference value (REF)
(Undefined)
Analog output scale number (SCL)
Data output conditions (PR)
(PRT)
Number of seconds for latch timer (RLT)
Setting Yes/No flags