Serial Gateway 7 - Omron CJ1W-SCU32 Operation Manual

SYSMAC CS/CJ Series Serial Communications Boards Serial
Communications Units OPERATION MANUAL (Cat. No. W336)
Section
Section 1
Introduction
Section 2
Initial Settings and I/O Memory
Allocations
Section 3
Installation and Wiring
Section 4
Using Host Link Communications
Section 5
Using Protocol Macros
Section 6
Serial Gateway
Section 7
No-protocol Mode
Section 8
Using 1:N NT Links
Section 9
Using Modbus-RTU Slave Mode
Section 10
Communications Performance
Section 11
Loopback Test
Section 12
Troubleshooting and Maintenance
Appendices
CX-Protocol Ver.1.9 OPERATION MANUAL (Cat. No. W344)
Section
Section 1
Introduction
Section 2
Installing/Uninstalling/Starting/
Ending
Section 3
Protocol Macro
Section 4
Using the Protocol Macro Function
Section 5
Object Creation
Section 6
Project and Protocol Editing
Section 7
Sequence Setting and Editing
Section 8
Step Setting and Editing
Section 9
Setting and Editing Messages and
Matrix Lists
Section 10
Communications PLC Setup and
Online Connections
CJ-series Serial Communications Units Operation Manual for NJ-series CPU Unit(W494)
This section introduces the features, specifications, and procedures of the Serial
Communications Boards and the Serial Communications Units.
This section describes the data exchange between the CPU Unit and the Serial Com-
munications Boards/Serial Communications Units, and the I/O memory allocation.
This section describes how to mounting the Serial Communications Board and Serial
Communications Units, and how to connect the ports to external devices.
This section describes the procedure and other information required to use Host Link
communications.
This section describes the procedure and other information required to use the proto-
col macros.
This section describes the procedure and other information required to use the Serial
Gateway.
This section describes the procedure and other information required to use the no-
protocol mode.
This section describes the procedure and other information required to use the 1:N
NT Links to Programmable Terminals
This section describes the procedure and other information required to use the
Modbus-RTU slave mode.
This section describes the communications performance of the Serial Communica-
tions Boards and the Serial Communications Units.
This section describes the procedure and other information required to conduct loop-
back test.
This section describes the troubleshooting and maintenance procedures for the
Serial Communications Boards and the Serial Communications Unit.
---
This section introduces the Protocol Macro function, the features and specifications
of the CX-Protocol, and outline of the standard system protocol.
This section outlines the functions of the CX-Protocol and describes installation pro-
cedure, startup/shutdown, and the user interface for the CX-Protocol.
This section describes details of the protocol macro functions.
This section describes the communications sequence and settings for the protocol
macro function.
This section describes how to create objects, such as projects, protocols, sequences,
steps, messages, and matrices.
This section describes details of the editing of projects and protocols.
This section describes details of the creating, setting and editing of sequences.
This section describes details of the creating, setting and editing of steps.
This section describes details of the creating, setting and editing of messages and
matrix lists.
This section describes details of the communications settings and online connec-
tions.
Manual Configuration
Description
Description
5