Table of Contents
Advertisement
Figure 34 System Information Page (Config Mode)
Step 2: Set the IP addresses
a. Click on the Network Settings: IP/IBM configuration page. Set the IP
address, Subnet, and Gateway to the address that is desired for the Out-
of-band Management Port. Click Submit. At this point the Web session
will terminate and the operator must login again using the new IP
address.
Trango Systems, Inc.
GigaPlus User Manual Rev 3.1
85
Advertisement
Table of Contents
Need help?
Do you have a question about the TrangoLINK GigaPlus and is the answer not in the manual?