Firmware Upgrade - Trango Systems TrangoLINK GigaPlus User Manual

 trapReboot: trap is triggered when the unit is rebooted.
 trapStartUp: trap is triggered when the unit boots up.
 trapBackupLink: trap triggered when the backup status changes.
 trapBackupTakeover: The trap is triggered when the Backup unit has taken over.
 trapModemLock - This trap will inform you when there is a change to the link
lock.
 trapDownShift - This trap will inform you when the modulation of the radio has
shifted downed.
Trango recommends monitoring RSSI, MSE, Ethernet Traffic (gigeEthOctets), Temp, and
modem lock as a minimum for thorough monitoring of the link. Additional objects and
traps can be added to the monitoring software as required. Please review Appendix D
MIB for a complete listing of MIB Objects and Traps.
Understanding and familiarization of Simple Network Management Protocol (SNMP)
concepts and software platforms are required to utilize SNMP management of the
®
TrangoLINK GigaPlus system.
Due to the large number of programs available for SNMP, Trango does not provide
support of SNMP software packages or NMS systems. Some common items to try while
having issues monitoring specific OIDs are:
 Properly load the MIBs into your software
 Add a " .0 " at the end of the OID string

Firmware Upgrade

The firmware on the TrangoLINK GigaPlus can be updated to a newer version through
IBM or OBM Ethernet Ports. A firmware release consists of up to two files which
contains the appropriate software files that are loaded onto the IDU and ODU:
IDU OS Image Firmware File
ODU Image Firmware File
If only the IDU firmware was changed then the ODU firmware does not need to be
updated.
Before beginning the update procedure, be certain that all required files have been
downloaded to an easily accessible directory on your local hard drive.
Trango Systems, Inc.
idu_GigaPlus_<version>.tar.gz>
<
<odu_fw.bin>
GigaPlus User Manual Rev 3.1
59