Trango Systems TrangoLINK GigaPlus User Manual page 152

a ASCII file (config.txt) of the current system
config export: The option allows the user to create a text file
(export_config.txt) of the current system configuration, which can then be
obtained from the IDU using ftp or tftp from a remove device (PC), which
the user can print or import to a different idu
config import: This option allows the user to push a configuration file (must
be the same format/name as created by export) into the system through
tftp and then issue the "config import" command to apply the settings
from the export_config.txt file to the system.
config remove: This option allows removing the current system
configuration file config.bin and all settings will be reset to factory
defaults. This is different than the "reset config" where all the password
settings are also being reset.
config save: Save command is used to save the current system
configuration to the flash, so that system settings are persistent across
reboot/power cycles.
Save command should be used after any system setting change, otherwise
changes will be lost after reboot. Multiple changes can be saved by one
save command.
config view: The option displays the current system configuration in ASCII
format on the console. The saved config is displayed.
152
Trango Systems, Inc. GigaPlus User Manual Rev 3.1