Trango Systems TrangoLINK GigaPlus User Manual page 132

Trap 1:
Trap 2:
Trap 3:
Trap 4:
Trap 5:
Set the trap 1 manager IP address using the trap ip command – repeat for additional
trap manager ip addresses:
(CLI-config)# trap ip 1 10.14.1.5
Trap 1:
SUCCESS
Enable the trap number 1 using the trap enable 1 on on command – The trap will be
enabled and the status shown:
CLI-config)# trap enable 1 on
Trap 1:
Trango Systems, Inc.
IP
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
IP Enable
10.14.1.5
IP Enable
10.14.1.5
GigaPlus User Manual Rev 3.1
Enable
off
off
off
off
off
off
on
132