Uptime - Trango Systems TrangoLINK GigaPlus User Manual

DESCRIPTION

uptime

SYNTAX
DEFAULT VALUE
DESCRIPTION
Trango Systems, Inc.
trap #
Trap 1 manager
Trap 2 manager
Trap 3 manager
Trap 4 manager
Trap 5 manager
Configuration Storage: Yes
trap without any parameter will display the current status for the
snmptrap information
trap is a system-level command.
trap is used to enable and configure traps and the IP address which
they will be sent to
Uptime
N/A
Uptime is used to display how long the system has been running, since
the last reboot/power cycle.
It shows the current time and uptime.
GigaPlus User Manual Rev 3.1
IP enable
0.0.0.0 OFF
0.0.0.0 OFF
0.0.0.0 OFF
0.0.0.0 OFF
0.0.0.0 OFF
200