Different Node Levels; View Node - Trango Systems TrangoLINK GigaPlus User Manual

Return to more recent commands in the history buffer after recalling commands with
the Up Arrow or Ctrl-P. Repeat the key sequence to recall successively more recent
commands.

Different Node Levels

View Node

This is the default node the users log in. This is strictly for viewing configuration
and statistics only. No configuration changes can be made at this level.
View Node Command List
acm
alarm
alignment_sp
atpc
ber
cableloss
config
cos
datapath
datapattern
date
default_opmode
egress_margin
eth_info
failover
fanctrl
freq
guard_time
help
httpd
Ibm
Trango Systems, Inc.
Display ACM feature status
Display Alarm status
Display alignment mode status (SP ODUs only)
Display ATPC status
Display ber test parameters
Display Cable loss values (SP ODUs only)
Enable Trango configuration mode
Display current status for class of service
Display datapath from FPGA
Display data source for data pattern
Display Time of Day
Display default opmode status
Display the current egress margin setting
Display ethernet port status and configuration
Display failover (1+1 HSB) mode
Display Fan status
Display Rf Tx/Rx frequency
Display failover guard time
Display help command
Display Web server (httpd) status
Display In Band Management configuration
GigaPlus User Manual Rev 3.1
138