Passwd; Port - Trango Systems TrangoLINK GigaPlus User Manual

DESCRIPTION

passwd

SYNTAX
DESCRIPTION

port

Trango Systems, Inc.
Opmode command is used to enable the transmitter on the ODU.
Opmode settings are not persistent across reboot. See default_opmode
command
freq and speed settings are required to be set to valid value before
opmode can be turned ON.
Passwd <new_password> <confirm_password>
Default: N/A. Default config node passwd is trango
Configuration Storage: Yes
passwd is a system-level command.
<new_password> must be at least 4 characters and no more than 10
characters
<new_password> and <confirm_password> must be identical for the new
password to take effect
Update the current password for entering "config-node". The new
pasword takes effect only after a reboot command or re-enter the "view-
node" from debug prompt with cli command.
GigaPlus User Manual Rev 3.1
175