Transmitter Minimum Power Output; Table 7 Maximum Set Power Levels By Band And Modulation; Table 8 Minimum Tx Set Power By Band - Trango Systems TrangoLINK GigaPlus User Manual

6
Modulation
GHz
Level
256 QAM +24
128 QAM +25
64QAM +25
32QAM +28
16QAM +28
QPSK +30

Table 7 Maximum Set Power Levels by Band and Modulation

When ATPC is active, the atpc_max power must be set to the maximum power for the
highest modulation used.

Transmitter Minimum Power output

The minimum transmit power that can set is limited by the ODU model and is not
dependent on the modulation level like the maximum levels are. The table below shows
the minimum power levels for each band and model family. The levels are also the
minimum levels that ATPC can set the output to when enabled.
6
HP ODU Model
GHz
HP1-XX-YYYY-ZZ +9
HP2-XX-YYYY-ZZ +0
Trango Systems, Inc.
Transmitter Maximum Power Output Level (dBm)
7 8 10 11
GHz GHz GHz GHz
+24 +24 +21 +21
+25 +25 +22 +22
+25 +25 +22 +22
+28 +28 +26 +26
+28 +28 +26 +26
+30 +30 +28 +28
Transmitter Minimum Power Output Level (dBm)
7 8 10 11
GHz GHz GHz GHz
+9 +9 NA +6
+0 +0 +0 +0

Table 8 Minimum TX set power by band

GigaPlus User Manual Rev 3.1
13 15 18 23
GHz GHz GHz GHz
+20 +20 +19 +19
+21 +21 +20 +20
+21 +21 +20 +20
+23 +23 +22 +22
+23 +23 +22 +22
+26 +26 +25 +25
13 15 18 23
GHz GHz GHz GHz
+3 +3 +2 +2
+0 +0 +0 +0
26 28 32 38
GHz GHz GHz GHz
+19 +16 +16 +16
+20 +17 +17 +17
+20 +17 +17 +17
+22 +21 +21 +21
+22 +21 +21 +21
+25 +23 +23 +23
26 28 32 38
GHz GHz GHz GHz
+2 +2 +1 +1
+0 +0 +0 +0
39