Utype - Trango Systems TrangoLINK GigaPlus User Manual

EXAMPLE
RELATED

utype

SYNTAX
DESCRIPTION
Trango Systems, Inc.
To display current uptime
(trango-config)# uptime
20:45:58 up 1:49, load average
Date
utype
Default: N/A
Configuration Storage: N/A
utype without any parameter will display current utype and other
related status.
Utype command will display unit's current utype, remote unit status,
election period status and sync status.
Current utype: No utype, Active, or Standby
Protection: Indicated if HW swiching protection is ON/OFF, dependent
upon the standby link status and guard time protection.
Remote unit status: no detection, Standby detected, active detected
Sync Status: Current configuration synchronization status.
Synchronized or Not synchronized.
Guard Time: Currently user configured guard interval.
GigaPlus User Manual Rev 3.1
201