Starting The Setup Menu - Hitachi VisionBase 8880R Product Manual

Starting the Setup Menu

The Setup Menu, stored in the ROM of the system equipment, must be started in the following way:
Power the system equipment.
1.
While "Press <F2> to enter SETUP" is being displayed, press the
2.
The Setup Menu starts and the Main menu is displayed.
If the operating system has already started before the
system equipment. Some type of OS, such as Windows NT, requires special operation such as shutdown.
Check the manual of your OS.
Hitachi VisionBase 8880R Server
PhoenixBIOS Setup Utirity
Main Advanced Security Boot Exit
System Time :
System Date :
Legacy Diskette A :
Legacy Diskette B :
Primary Master :
Primary Slave :
Network Server
System Information
System Memory
Extended Memory
↑↓ Select Item
F1 Help
←→ Select Menu
ESC Exit
Figure 18 Entering Setup Menu
F2
Item Specific Help
[HH:MM:SS]
[MM/DD/YYYY]
1 /
[1.44/1.25MB 3 "]
2
[Disabled]
[None]
[None]
[Disabled]
xxxKB
xxxMB
-/+ Change Values F9 Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
key is pressed, terminate the OS and then restart the
F2
Ch 2: System Environment Setting
key.
23