Sending Feedback To Cisco; Logging Out - Cisco UC 320W Administration Manual

Small business unified communications

Table of Contents

Getting Started in the Configuration Utility

Sending Feedback to Cisco

Unified Communications UC 320W Administration Guide

•

Load applied configuration from the device: Choose this option to reload

the currently applied configuration from the UC 320W into the configuration

utility for editing. You can use this option as an "undo" procedure when you

have been editing your configuration but want to abandon your unapplied

changes. After you click Restore / Load, the applied settings are reloaded

into the configuration utility. You can then view or edit the settings, as

needed. When prompted to log in, use the login credentials that are

currently applied to the device (current login credentials are not overwritten

when you load a configuration).

•

Restore from Site Backup File: Choose this option to restore and apply a

full system configuration file, including voicemail, prompts, and other

customized system files. Click the radio button, and then click Choose File

to select the backup file from your PC. Then click Restore / Load. The

saved configuration is applied to your system, and all connected devices

reboot.

Cisco welcomes feedback from our customers. To send your comments and

suggestions, click the Feedback link at the top of the page. Then choose a

Category, and type your comments in the Issues or suggestions box. Also take a

moment to provide a Rating for this configuration utility. Finally, click Send.

To log out immediately, click the Log Out link at the top of the page. Any unsaved

changes are abandoned.

Table of Contents