Preparation For Transporting The Copier - Ricoh FT4430 Service Manual

PREPARATION FOR TRANSPORTING THE COPIER

1.
Short Haul Transportation
The copier may be seriously damaged if it is moved without proper
preparation. Before moving the copier from its place of installation, be sure to
prepare it for transportation as follows:
1. Insert the drum protective sleeve [A].
2. Re-install the development unit.
3. Re-install the drum stay and charge corona unit.
4. Secure the following items with tape [B]:
5. Remove the sorter to prevent damage to the bins.
6. Remove the cassettes.
7. Remove the original table from the document feeder.
8. Remove the LCT if it is installed in the 2nd feed station.
[B-]
3-17
16 April '88
[ B