Transporting The Copier; Do's And Don'ts - Ricoh M5 Service Manual

8. TRANSPORTING THE COPIER

r

9. DO'S AND DON'TS

Operating Cautions
While copying:
1.
Do not turn off the main switch. Do not hold the slider.
Do not lift the platen cover.
Do not overload the cassette. (The MAXIMUM capacity is 100 sheets.)
2 .
3 . Do not let the copy tray become overloaded (The MAXIMUM capacity is 20
4 .
Do not lay anything weighing more than 3 kg on the exposure glass.
5 . Do not lay tools or other hard objects on the exposure glass.
6. Keep corrosive liquids, such as acid, off the machine.
7. Do not touch the copy paper if your fingers are wet or oily; fingerprints may appear
on the copy.
8. Do not allow paper clips, staples, or other small metallic objects to fall inside the
machine.
9. To avoid misfeeds, copy transparencies without a backing sheet. (Use recom-
mended transparencies.)
10.
Do not touch the master (purple material) and avoid exposing
General Cautions
1, Since some parts of the copier are supplied with high voltage,
switch is off before working on the copier.
2. Do not modify or replace any parts other than the ones mentioned in this manual.
3. When not using the copier for a long period, disconnect the power supply plug.
4,
Never store the master unit where it will be exposed to heat,
Before moving the copier from its
place of installation, remove the
copy tray and secure the slider
with strips of tape.
may be badly damaged if it is
moved when the slider is not pro-
perly secured.
safety, use the grips diagonally
opposite each other to handle the
copier.
Leave the master unit and develop-
ment unit in the machine.
Do not unplug the power cord.
– 2 9 –
May, 25, 1985
\
The copier
F o r M A X I M U M
I
.
copies.)
it to light.
make sure the main