Ricoh FT4430 Service Manual page 259

[ c l
I
8. Slip off the timing belt [A] while lifting the belt tightener.
9. Remove the registration clutch assembly [B] (1 E-ring).
10. At the front, remove the lever spring [C] and lower the original entrance
guide [D].
11. Remove the registration drive gear [E] (1 E-ring, 1 pin [F]).
NOTE: Do not lose the pin.
12. Remove the registration roller [G] as shown in the figure (1 E-ring, 2 bear-
ings).
1
7-33
16 April '88