Ricoh FT4430 Service Manual page 111

15 Swing the toner collection bottle cover [A] (1
plug the toner overflow sensor connector [B].
16 . Remove the toner collection bottle [C], and lower the T/S corona unit [D].
17 . Place a sheet of paper [E] over the T/S corona unit.
Remove the charge corona unit [F] together with the wire cleaner [G] (1
18 .
screw).
Remove the drum stay [H] (1 knob and 1 screw).
19
The drum stay knob [1] is reverse threaded.
NOTE:
20. Pull out the drum protective sleeve [J].
Save the drum protective sleeve
NOTE:
copier.
21. Reinstall the all units.
NOTE: - Make sure that the wire cleaner
Make sure that the T/S corona unit is in its original position.
Make sure that the hooks of the transport plate [K] are
positioned underneath the bottle cover [L].
A l
screw) to the left, and un-
for future use when servicing the
is properly positioned.
3-7
.
16 April '88