Ricoh FT4430 Service Manual page 109

2. Installation Procedure
1. Remove the shipping tapes [A] from the copier as shown.
2. Open the front cover [B], and remove the shipping tape [C] and the
wedge [D] between the registration rollers, and cut the cable tie [E]
securing the toner collection bottle.
3. Remove the scanner lock plate cover [F] (1 screw).
4. Remove the scanner lock plate [G] (1 screw).
NOTE: Save the scanner lock plate for future use.
5. Reinstall the scanner lock plate cover.
NOTE: Save the sort/stack key and cover [H], attached to the right inner
cover for future use.
[ B ]
[ E ] [ C ]
[ D ]
[ H ]
3-5
16 April '88