Ricoh FT4430 Service Manual page 113

25 . Place a few sheets of white paper (A3 or 11" x 17") on the exposure glass
and lower the platen cover.
26 . Plug in the machine and turn on the main switch.
27 .
After the warm up period is completed, enter 99 copies and press the
Start Key for drum conditioning.
28 .
After the machine stops, turn off the main switch.
29 . Turn off DIP switch 1-1 and reinstall the DIP switch cover.
30 . Adhere the Operating Instructions cards [A] over the DIP switch cover
using two-sided tape as shown.
31 . Adhere the original holder [B] on the platen cover using two-sided tape
and set the receiving tray [C].
32 .
Load some paper into the cassette and check the machine operation and
copy quality.
33 .
Fill out the New Equipment Condition Report.
3-9
16 April '88