Paper Size Sensor Replacement - Ricoh FT4430 Service Manual

16 April '88

3. Paper Size Sensor Replacement

1. Do steps 1 to 8 of the tray down sensor and positioning switch replace-
ment procedure.
2.
Remove the front guide post [A] (1 screw and 1 hook).
3. Remove the paper size sensor bracket [B] (1 screw).
4. Replace the paper size sensor [C] (1 screw and 1 connector.)
NOTE: When installing the sensor bracket, make sure that the harness is
positioned inside the sensor bracket.
9-16