16 April '88
SORTER INSTALLATION
1. Accessory Check
Check the quantity and condition of the accessories in the box according to
the
following list:
1. Installation Procedure
(115V - English/220V - five languages)
2. New Equipment Condition Report
3. Envelope-NECR (115V only)
4. Grounding Screw
5. Toothed Washer
6. Knob Screw
7.
12
Spacer 4.2 x
8. Multilingual Decal (220/240V only)
Interface PCB Type E and Sorter Adapter Type E are also required to
install the sorter.
Check the accessories according to the following list:
Sorter Adapter Type E box:
1. Mounting Stud
2. Screw
Interface PCB Type E box:
PCB Mounting Stud
1.
NOTE: -
The interface PCB is not necessary with the A024-I 7 and A024-27
version machines (already equipped at the production line).
- The interface PCB is not necessary if a DF is already installed in the
system.
- The sort/stack key top and key cover are enclosed with the copier.
x 2.9
2
8 - 1 0
1