Cassette Modification - Ricoh FT4430 Service Manual

CASSETTE MODIFICATION

1. Take off the cassette cover [A].
2. Remove the side fences [B] (1
positioning pins).
3. Re-position the rear fence [D] in the desired paper size position (1
screw).
NOTE: Paper size positions are shown on the inside of the cassette,
4
Reinstall the bottom plate confirming the positioning pins have clicked into
place.
5 .
Reinstall the side fences in the desired paper size position.
6 .
Attach the proper paper size decals [E] on the cassette at the positions
shown.
7 .
Insert the actuator plate [F] in the slot on the front of the cassette.
screw each) and the bottom plate [C] (2
3-15
16 April '88
E ]