Pick-Up Roller Replacement - Ricoh FT4430 Service Manual

2. Pick-up Roller Replacement

1. Remove the DF cover (4 screws, 2 collars).
2. Lift up the pick-up roller unit [A] and remove the snap ring [B].
3.
Slide off the rear pick-up roller [C].
NOTE: Be careful not to lose the pin.
Remove the E-ring [D] and bushing [E].
4.
5. Slide off the front pick-up roller assembly [F].
[ B ]
[ c l
7-23
16 April '88
E ]