Fusing Pressure Adjustment - Ricoh FT4430 Service Manual

16 April '88

8. Fusing Pressure Adjustment

1. Remove the fusing unit.
2. Remove the fusing unit cover (2 screws).
3. Remove the fusing unit knob (1 screw).
Remove the oil pump mechanism along with the oil tank (2 screws, 1 con-
4.
nector).
5. Move the pressure springs [A] to the desired position. See the following
table:
Setting
1
2
3
NOTE: Position the front and rear springs in the same position.
[ A ]
3
Fusing Pressure
11.9kg
14.9 kg
16.7 kg
* Factory Setting
5-52