11. PREPARATION FOR TRANSPORTING THE COPIER
- SHORT HAUL TRANSPORTATION -
The copier may be seriously damaged if it is moved without proper pre-
paration. Before moving the copier from its place of installation, be sure
to prepare it for transportation as follows:
1. Insert the drum protective sleeve [A].
2. Re-install the development unit.
3. Re-install the drum stay and charge corona unit.
4. Secure the following items with tape [B]:
Manual feed table
Platen cover or document feeder
Power supply cord (roll up first)
Cassette tray front cover
5. Remove the sorter to prevent damage to the bins.
6. Remove the cassettes.
7. Remove the original table from the document feeder.
8. Remove the LCT if it is installed in the 2nd feed station.
1-19
15 MARCH 1987