Transport; Transport Unit And Transpofl Belt Removal - Ricoh FT4430 Service Manual

16 April '88

TRANSPORT

1. Transport Unit and Transport Belt Removal
Swing the toner collection bottle cover [A] to the left (1 screw).
1 .
Disconnect the toner overflow sensor connector [B].
2 .
Remove the toner collection bottle [C].
3 .
Remove the development unit [D], PTL board [E], and the charge corona
4 .
unit [F] (1 screw).
Lower the T/S corona unit [G].
5 .
Remove the drum stay [H]
6 .
the drum.
Be sure the protective
NOTE:
7. Remove the fusing unit.
(1 knob [1] and 1 screw), the cleaning unit and
sleeve is installed before removing the drum.
5-54