Replacement And Adjustment; Exit Roller And O-Ring Replacement - Ricoh FT4430 Service Manual

REPLACEMENT AND ADJUSTMENT

1.

Exit Roller and O-Ring Replacement

1. Remove the sorter from the copier and the sorter adapter from the sorter.
2. Remove the front and rear covers (2 screws each).
3. Remove the ground wire [A] of the upper guide plate [B] (1 screw).
4. Swing the guide plate up, then remove it by carefully pulling it up.
5. ,Remove the inner cover [C] (4 screws).
6. Unhook the front [D] and rear [E] pressure springs.
[ A l
8-13
16 April '88