Thermofuse Replacement - Ricoh FT4430 Service Manual

7. Thermofuse Replacement

1. Perform steps 1 to 3 of "Thermistor Replacement".
2. Remove the thermofuse bracket [A] (1 screw).
3. Remove the oil pump mechanism [B] with the oil tank [C] (2 screws and 1
connector).
4. Remove the thermofuse wire from the front lamp terminal [D] (1 screw).
5. Disconnect the thermofuse [E] (1 connector) and install the new ther-
mofuse.
5-51
16 April '88