Ricoh FT4430 Service Manual page 149

16 April '88
2. 2nd Mirror Removal
NOTE: This procedure is usually performed in order to make cleaning of the
3rd mirror easier.
Turn off the main switch.
1 .
2 .
Remove the exposure glass. (See Exposure Glass Removal.)
3 . Move the 1st scanner 2/3 to the right by pushing it at the rear.
4 . Remove the front spring plate [A] by pressing the top of the spring and
moving the plate towards the front of the machine.
5 Carefully pull the 2nd mirror [B] towards the front of the machine to
remove the rear spring plate [C].
6 Lift the mirror out of the machine rear side first.
7 .
Clean mirrors with silicone cloth or water, and then dry.
5-2