Pick-Off Pawl Replacement - Ricoh FT4430 Service Manual

6. Pick-off Pawl Replacement

1. Remove the release spring [A] and the pressure lever [B] (1 screw).
2. Remove the collection coil gear [C] from the the toner collection coil shaft
(1 E-ring).
3. Remove the pawl shaft pin [D] from the pawl shaft [E].
4. Push the pawl shaft to the rear and slide off the cam holder [F] from the
front side plate.
5. Take out the whole pawl shaft assembly.
6. Slide off the cam holder and cam rider [G].
7. Slide off the front pick-off pawl [H] (1 positioning pin [1]) and the front
pawl spring [J] (1 screw).
8. Slide off the rear pick-off pawl (1 positioning pin).
5-31
16 April '88