Ricoh FT4430 Service Manual page 170

Turn on the main switch and allow it to warm
4.
5. Enter "55" using the Number keys,
6. Enter "99" in the copy counter.
7. Press the Start key to show Vsg in
8. If Vsg is incorrect, remove the rear cover (2 screws).
volts.
0. Press the C/S key to stop the copier.
11. Turn off the main switch and turn
up.
then press the Enter key.
the magnification indicator.
off DIP SW No. 1-1
5-23
and No. 1-8.