Ricoh FT4430 Service Manual page 122

16 April '88
2. Long Haul Transportation By Vehicle
[ D ]
[ A ]
If the machine is to be transported by vehicle, do the following steps after you
have completed the short haul procedure.
1. Remove the developer from the development unit.
2. Place a wedge [A] between the registration rollers.
3. Remove the scanner lock plate cover [B] and install the scanner lock
plate [C].
NOTE: Confirm that the scanner is at the home position.
Secure the following items with tape [D]:
4.
T/S corona release Iever to the drum stay knob
F
Transport plate to the toner collection bottle cover
5. Remove the sorter and secure the following items with tape:
Jam clearing tray
Bins--tape the right and left edges of the spacers together.
6. Secure the LCT covers and power supply cord with tape.
[ c l
3-18
[ B ]