Fusing; Fusing Unit Removal - Ricoh FT4430 Service Manual

16 April '88

FUSING

1. Fusing Unit Removal

1. Open the left and right front doors.
2. Push the fusing unit release lever [A] to the right.
3. Pull out the fusing unit [B] until it is fully extended.
4. Push the fusing unit release lever to the right, move the fusing unit to the
left to disengage the stopper pin [C], and remove the unit from the
copier.
NOTE: Keep the fusing unit in an upright position so that silicone oil does
not spill.
S-44
,