Ricoh FT4430 Service Manual page 110

16 April '88
[ B ]
\
6. Pull out the fusing unit [A] to the lock position and remove the fusing unit
cover [B] (2 screws).
Prime the oil supply pad [C] with silicon oil.
7 .
Fill the oil tank [D] with silicon oil.
8 .
9 .
Manually operate the oil pump lever [E] and confirm the proper operation
of the silicon oil supply system.
10 .
Reassemble the fusing unit and return it to its original position.
11 .
Raise the development lock lever [F] and pull out the development unit
[G]. Place the unit on a clean sheet of paper.
12 .
Separate the toner tank [H] from the development unit [1] (2 screws).
13 . Pour one bottle of developer [J] into the development unit while turning
the knob [K] counterclockwise to distribute the developer.
Remount the toner tank on the development unit.
14 .
[ F ]
3-6