Ricoh FT4430 Service Manual page 253

[ B ]
10. Slide off the feed-in guides [A] and remove two E-rings [B].
11. Remove the bushing [C] and slide the pulley towards the front to remove
the pulley pin [D].
12. Slide the pick-up roller unit [E] to the front and remove the E-ring.
13. Slide the feed roller [F] to the front and remove the pin.
14. Slide off the feed roller shaft [G].
15. Replace the feed roller and reassemble.
[ F ]
7-27
16 April '88
.