Return; Screen-Length Disable - HP A8800 Series Fundamentals Command Reference

[Sysname-GigabitEthernet3/1/1] quit
[Sysname] quit
<Sysname>

return

Syntax
return
View
Any view except user view
Default level
2: System level
Parameters
None
Description
Use return to return to user view from any other view in one operation, instead of using the quit command
multiple times. Pressing Ctrl+Z has the same effect.
Related commands: quit.
Examples
# Return to user view from GigabitEthernet 3/1/1 interface view.
[Sysname-GigabitEthernet3/1/1] return
<Sysname>

screen-length disable

Syntax
screen-length disable
undo screen-length disable
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use screen-length disable to disable pausing between screens of output for the current session.
Use undo screen-length disable to enable pausing between screens of output for the current session.
By default, a login user uses the settings of the screen-length command. The default settings of the
screen-length command are: pausing between screens of output is enabled and 24 lines are displayed
on a screen.
9