Disable; Erase - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Overview
Software Overview
N o t e
1-50

Disable

To leave the enable mode context, type disable. The Secure Router OS will
return you to basic mode context.

Erase

The erase command is a file management command. Table 1-6 shows the
erase command options.
Syntax: erase [{cflash | flash} <filename> | startup-config | file-system cflash]
Table 1-6. File Locations for the erase Command
File location
cflash <filename>
file-system cflash
flash <filename>
startup-config
For example, entering erase flash <filename> will delete the file you specify
from internal flash:
ProCurve# erase flash oldconfig
When erasing files, be sure to enter the filename exactly as it appears in the
directory.
Erasing the startup-config files will return the router to the factory default
settings at the next reboot. Entering erase startup after executing the
autosynch command will delete the startup-config files from both flash and
compact flash. If you have a compact flash card, and are not running the
autosynch command, this command erases the startup-config only from
compact flash. If you do not have a compact flash card, this command erases
the startup-config file from flash.
Use the erase file-system cflash command to format your compact flash
card memory. Using this command will erase any existing files on your
compact flash card.
Description
erases the specified file from compact flash
formats compact flash
erases the specified file from flash
erases the startup-config file