Ladder Viewer and Ladder add-on (828D only)
20.4 Displaying PLC properties
20.4
Displaying PLC properties
The following PLC properties can be displayed in the "SIMATIC LAD" window:
● Operating mode
● Name of the PLC project
● PLC system version
● Cycle time
● Machining time of the PLC user program
Procedure
658
1.
Select the "Start-up" operating area.
2.
Press the "PLC" softkey.
The ladder diagram display opens and displays the PLC information.
3.
Press the "Reset mach.time" softkey.
The data of the machining time is reset.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning