4.8
Secure operation of the engineering software
For more information on secure operation of the engineering software, refer to the TIA Portal
online help.
4.9
Secure operation of CPUs
This section describes measures recommended by Siemens to protect your device from
manipulation and unauthorized access.
4.9.1
Secure configuration
Information about ports, services and default states can be found in the Communication
Function Manual (https://support.industry.siemens.com/cs/ww/en/view/59192925) and the
SIMATIC Drive Controller Equipment Manual
(https://support.industry.siemens.com/cs/ww/en/view/109766666).
4.9.2
User management and access control
4.9.2.1
Administration of user accounts
Creating and managing user accounts with appropriate usage rights is an important measure,
as every active user represents a potential security risk.
Take the following security measures:
• Train your personnel in understanding their rights and password assignment
• Regularly check the user accounts
You can find information on creating and managing user accounts in the section Local user
management (Page 237) and in the STEP 7 online help (TIA Portal).
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD
4.8 Secure operation of the engineering software
Industrial cybersecurity
37