High-Speed Settings (Cycle832) - Siemens SINUMERIK 840D sl Operating Manual

Parameter Description
Tool Tool tip position when swiveling
10.6.3

High-speed settings (CYCLE832)

Function
The "High Speed Settings" function (CYCLE832) is used to preset data for the machining of
free-form surfaces so that optimum machining is possible.
The call of CYCLE832 contains three parameters:
● Machining type (technology)
● Axis tolerance
● Input of the orientation tolerance (for 5-axis machines)
Machining of free-form surfaces involves high requirements for both velocity and precision and
surface quality.
With the "High Speed Settings" function, you can achieve optimum velocity control depending
on the type of machining (roughing, rough-finishing, finishing). For this purpose, the cycle
activates the compressor COMPCAD (for Advanced Surface option) or COMPSURF (for TOP
Surface option).
Note
Programming a cycle
Program the cycle in the technology program before the geometry program is called.
Default values
You can use the "Default values" softkey to assign default values to the tolerance parameters.
Turning
Operating Manual, 05/2017, A5E40868721
Tracking
The position of the tool tip is maintained during swiveling.
No tracking
The position of the tool tip changes during swiveling.
Software option
To use the "High Speed Settings" (CYCLE832) function, you require the "Advanced
Surface" software option.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Programming technology functions (cycles)
10.6 Further cycles and functions
Unit
555